What's in it?
Search Entire CPID Database
Enter Products, Manufacturers, Chemicals, Product Categories and Product Types
 |
Devcon Flow-Mix 60 Sec. Epoxy
Products in this Consumer Product Information Database (CPID) are classified based on their composition:
Substances: single chemicals
Preparations: products which contain chemicals that can be easily separated during normal use
Articles: products or product assemblies that do not contain chemicals that can be separated out from the product or assembly under normal or advertised use.
Classification: Preparation
Indicates country where product is sold.
Market: US/CanadaState-of-the-art syringe automatically mixes Devcon Flow-Mix 60 Sec. Epoxy hardener and resin during application. Eliminates hand mixing, messy clean up and the difficulty of applying to your surface. Comes with two Instant-Mix nozzles. Flow-Mix 60 Second is high strength without the wait. Very fast 1 minute set time. All purpose, works with most hard surfaces
Purpose of product.
Usage: Heavy duty epoxy adhesiveStructure such as solid, liquid, aerosol etc.
Form: liquidDate when validity of Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was last verified.
Date verified: February 23, 202110 Columbus Boulevard
Hartford CT 06106
-
Chemical Composition/Ingredients
The GHS is an acronym for The Globally Harmonized System of Classification and Labelling of Chemicals. The GHS is a system for standardizing and harmonizing the classification and labelling of chemicals. Chemicals are associated with codes that define their health, physical and environmental hazards.This universal hazard communication system was developed to ensure that employers, employees and consumers are provided with adequate, practical, reliable and comprehensible information on the hazards of chemicals, so that they can take effective preventive and protective measure for their own health and safety.
Advanced
The GHS classifications for chemicals associated with products in this database may be viewed by selecting the "Advanced" button on the Chemical Ingredients tables. Since this is a work in progress, GHS classifications may not be shown for all chemical ingredients.-
Primary Chemical Name is the standard name assigned to a chemical substance.
ChemicalChemical Abstracts Service Registry Number is a unique identifier for a chemical and its synonyms. CAS numbers identify the chemical, but not its concentration or specific mixture. CAS Registry Numbers are assigned by the Chemical Abstracts Service, a division of the American Chemical Society. For more information: www.cas.org
CAS No./ID
We have assigned "ID numbers" (with 6 leading zeros or nines, e.g., 000000-xx-x , 888888-xx-x) or 999999-xx-x) for blends and chemicals that do not have CAS numbers.Percent of chemical in preparation.
% Conc.Chemical of Concern (CoC)
Chemical of Concern(CoC)Polyamide resin 000000-47-6 >80 (hardener) No Bis(2-(dimethylamino)ethyl) ether 003033-62-3 >3 (hardener) No Trade secret or proprietary formula 000000-02-1 (hardener) No Bisphenol A, epichlorohydrin polymer (epoxy) 025068-38-6 >90 (resin) No Dimethyl siloxane, reaction product with silica 067762-90-7 <10 (resin) No -
Health Effects Information
Ingredients and Health Effects Information are taken from the manufacturer's product label and/or the Material Safety Data Sheet (MSDS). Products are not tested and manufacturer's information presented here is not evaluated by DeLima Associates.
View Material Safety Data Sheet(MSDS) Date that Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was issued by manufacturer of product.
MSDS DATE :August 13, 2008 Health Flammability Reactivity HMIS is the Hazardous Materials Identification System developed by the American Coatings Association and indicates the levels (“1” to “4”) of Health Hazard, Flammability Hazard and Physical Hazard associated with a specific product.
HMIS RATING3* 1 1 -
Warnings
DANGER!. Corrosive. Harmful if swallowed. Harmful if inhaled. Causes eye and skin burns.
-
Acute health effects
Hazards Identification
From MSDS:
Emergency Overview
DANGER!. Corrosive. Harmful if swallowed. Harmful if inhaled. Causes eye and skin burns.
Potential health effects
Primary Routes of Exposure: Eye and skin contact, ingestion, inhalation
Symptoms of acute overexposure
Skin contact: Corrosive. Severe irritation or burns, necrosis, blistering and permanent injury.
Eye contact: May cause severe eye irritation. Corneal injury may result.
Inhalation: If the hardener is poorly ventilated, strongly heated or atomized, the vapor or mist can cause severe irritation of the respiratory tract, damage contacted tissue and produce scarring. Coughing and chest pain may result, nausea and vomiting in severe cases. Overexposure to fumes or vapors may cause delayed lung injury and chemical pneumonia.
Ingestion: Causes severe damage to mucous membranes if swallowed. May cause intestinal pain/discomfort, nausea, vomiting, diarrhea. May cause burns of the mouth, throat and stomach. Aspiration can be a hazard if this material is swallowed.
Medical Conditions Recognized as Being Aggravated by Exposure: Preexisting eye, skin and respiratory disorders may be aggravated by overexposure to this product.
-
Chronic health effects
From MSDS:
Prolonged or repeated skin contact may cause sensitization, with itching, swelling or rashes on later exposure. Repeated or prolonged exposure may cause adverse eye effects (conjunctivitis, corneal damage), or skin effects (rash, irritation, corrosion). Overexposure may cause delayed lung injury and chemical pneumonia. -
Carcinogenicity
No data available.
-
Handling information
Avoid contact with the skin and the eyes. Wash thoroughly with soap and water after using and particularly before eating, drinking, smoking, applying cosmetics or using toilet facilities. Launder contaminated clothing and protective gear before reuse. Discard contaminated leather articles. Handle mixed resin and hardener in accordance with the potential hazard of the curing agent used. Provide appropriate ventilation/respiratory protection against decomposition products during welding/flame cutting operations and to protect against dust during sanding/grinding of cured product.
Store in a cool, dry area. Store away from heat. -
Disposal information
Disposal should be made in accordance with federal, state and local regulations.
-
California Prop. 65 Warning
For purposes of the California Safe Drinking Water and Toxic Enforcement Act of 1986 (Prop 65), this product contains a chemical(s) known to cause cancer and birth defects or other reproductive harm.
-
First Aid
Eye Contact: Flush eyes with clean water for at least 20 minutes while gently holding eyelids open, lifting upper and lower lids.
Skin Contact: Immediately remove contaminated clothing and excess contaminant. Flush with water for at least 15 minutes. Wash thoroughly with soap and water. Consult a physician if irritation develops.
Inhalation: If inhaled, remove from area to fresh air. Get medical attention if respiratory irritation develops or if breathing becomes difficult
Ingestion: If swallowed, give at least 3-4 glasses of water, but do not induce vomiting. Do not give anything by mouth to an unconscious or convulsing person. Get medical attention
-
UN Global Harmonization Classification
